General profiles are not easy to rust, and are relatively light and have high hardness. The advantages of general profiles are far more than these. The assembly of general profiles requires corresponding general profile accessories.

When assembling the universal profile frame, we usually use the following universal profile accessories to connect: .

1. Corner code.

It is used for right-angle connection between two general profiles, and can also be used for the connection of general profiles that need to be moved. Generally, corner pieces of different specifications and sizes are selected according to the width of the profile groove.

2. Bolts and nuts.

Bolt universal profiles and nuts need to be used together, and are indispensable universal profile accessories in profile connection.

3. Special connector.

It is used for right-angle connection between two profiles, extension connection of profiles, connection of two or three profiles together, movable connection between profiles, non-90° oblique connection between profiles, etc.

4. Brackets and casters.

Brackets and casters are universal accessories for all kinds of universal profile brackets and equipment.

5. Decorative parts.

Decorative pieces can well cushion, protect, seal, look good and keep the surface of general profiles clean. Each accessory has its own purpose.

General profile general profile assembly service field.

1. Transmission equipment frame.

The transmission equipment includes belt strips, assembly lines, plate chain lines, roller conveyor lines, mesh belt lines, etc. The general profile is used as the frame of the conveying equipment, which is convenient for transportation, can be assembled on site, no noise, no pollution, very convenient.

2. Workbench frame.

Universal profiles are generally used for workbench frames in factory workshops, because universal profiles are easy to maintain, antistatic, and non-conductive, and can be assembled arbitrarily whether it is an assembly line or an independent platform.

3. Exhibition display stand.

The display stand adopts universal profiles as the frame, which is not only light in weight, convenient for transportation, convenient for on-site installation without welding, and more beautiful in appearance.

4. The enclosure of automation equipment.

The automation equipment is a relatively high-end equipment. It can run automatically with simple operation by humans. The outer frame of the automatic device can play a dual role of protecting the operator, and it is generally made of lightweight general-purpose profiles.

5. Vehicle inspection frame.

This is used for testing by automobile manufacturers. It has relatively high requirements for load-bearing. Generally, heavy-duty general-purpose profiles are used, and the quality is only one-third of the previous one, so it is very convenient to move. Some movable clearance platforms need to open molds to customize general-purpose profiles.